Skip to main content

DFC Design

Home

we MAKE Electronics...

  • Čeština
  • English

E-mail info@dspfpga.com Phone +420 511 112 863

Search

  • Menu
  • Home
  • Services
    • Hardware Design Services
    • Special Purpose Machines
    • FPGA Design Services
    • Machine Vision Applications
  • FPGA modules
  • Articles
  • Job
  • Contact

Articles

You are here

  • Home
  • Articles
  • Jetson Xavier NX acquisition module

    The module is designed for controlling, processing, and transmitting measured data to a higher-level system. The module is equipped with AD and DA converters for transmitting measurement impulses and detecting responses. The data from the converters...

    Saturday 8. 7. 2023 | inserted: Ing. Soběslav Valach

  • Jetson AGX Xavier FPGA Module

    The Xavier module is designed for the analysis and processing of communication network data, analog signals obtained by AD conversion, or generated by DA converters. Information processing is carried out using an FPGA system connected to the NVIDIA...

    Saturday 8. 7. 2023 | inserted: Ing. Soběslav Valach

  • PCI Express Industrial module

    Xilinx Kintex®-7 XC7K70T-1FFG676 or XC7K160T-1FFG676 FPGA 2 x CAN interface 2 x RS232 interface 2 x LIN interface 2 x RS422/485 Low-jitter 100 MHz oscillator 4 x10/100/1000 Ethernet PHYs with RGMII - GiGe, Ethernet, EtherCAT X4 Gen...

    Tuesday 4. 10. 2016 | inserted: Ing. Soběslav Valach

  • 3G/HD/SD SDI video protocol translation to 10Gbit

    Designed module converts 6 inputs 3G/HD/SD SDI video data stream to 10Gbit Ethernet. The module is extended by one stereo audio input and RS485/422 interface used for camera and lens control. The platform architecture is based on low cost Spartan 6...

    Saturday 27. 12. 2014 | inserted: Ing. Soběslav Valach

  • Altera Cyclone V SoC (FPGA + ARM) Module

    The Leona module is industrial-grade SoC module integrating an Altera Soc Cyclone V, a triple gigabit Ethernet PHY (two for HSP and one for FPGA), 1 Gbyte DDR3 SDRAM with 32-bit width, 2 x 32 Mbyte SPI Flash memory for confiuration and operation, SD...

    Sunday 31. 8. 2014 | inserted: Ing. Soběslav Valach

DFC Design

Společnost DFC Design se zaměřuje na čtyři hlavní obory činností a to vývoj elektroniky a elektronických systémů, vývoj firmwaru a IP funkcí pro FPGA a DSP, zpracování obrazu z kamerových systémů a vývoj a návrh testovacích průmyslových systému. V rámci spolupráce se zahraničními partnery dále nabízí prostředky určené pro podporu vývoje v oblasti programovatelné logiky FPGA (překladače jazyka C do HDL, vývojové moduly, IP funkce) a Embedded zařízení (moduly s procesory ARM, Texas Instruments, převodníky úrovní a systémy pro akvizici dat, SDR – MIMO a jiné).

Kontaktujte nás

DFC Design, s.r.o.
Strmá 3001/11B, 616 00 Brno
Česká Republika

Telefon +420 511 112 863
E-mail info@dspfpga.com

EU program INOVACE

Projekt „Pokročilé algoritmy pro systémy perimetrické ochrany“ č. CZ.01.1.02/0.0/0.0/20_321/0024524 v rámci programu APLIKACE VIII je realizován za finanční spoluúčasti EU.
Realizátor: DFC Design s.r.o.
Ukončení realizace projektu: 12/2022

© 2017 DFC Design, s.r.o

Webdesign Wertu studio

Search

×
Contact us